Star S-Series

Calcium Reactor

Combines top-quality materials, a high-efficiency pump and innovative design to deliver a superb calcium reactor.

Where to Buy

Technical Specifications

Dimensions
Star S-1 Star S-2 Star S-3
Footprint Length 11" 12" 14.6"
Footprint Width 10" 11.5" 13"
Height 22" (not including hose) 22" (not including hose) 21" (not including hose)
Chamber Capacity 3.2L 5L 10L
Reaction Tube Diameter 5" 6" 8"
Capacity Up to 300 gal Up to 500 gal Up to 1000 gal
Power Specifications
Pump Italian-made SICCE Syncra silent 1.5 Italian-made SICCE Syncra silent 1.5 Italian-made SICCE Syncra silent 2.0

The all-new AquaMaxx Star S-Series combines top-quality materials, a high-efficiency pump and innovative design to deliver a superb calcium reactor. Special injection design reduces wear-and-tear and extends the life of the Italian-Made Sicce pump. Conical lid virtually eliminates all dead spots inside the reactor and recirculates unused CO2 to maximize efficiency. With a built-in a pH probe holder, you can easily keep an eye on the pH inside the calcium reactor with a pH monitor or control the CO2 with a pH controller. Not only will you be impressed by its effectiveness, you will also be impressed visually by the look and design of the AquaMaxx Star Calcium Reactor!

With the AquaMaxx Star Calcium Reactor, CO2 is injected on the outlet side of the pump. This prevents cavitation and helps to prolong the life of the pump. Outlet-injection also ensures that the flow rate inside the reactor stays constant to maximize efficiency.

CO2 recovery design re-injects excess/unused CO2. This helps to lower CO2 usage and to make sure no excess CO2 goes back to your aquarium.

Gravity Feed or Aqualifter Pump recommended for installation!

Reverse-flow design to prevent clogging and improve water circulation.

Thumbscrews allow for easy lid removal. Easy to clean and service!

Designed to be used with any calcium reactor media.

 

*Late models no longer include sponges to avoid CO2 from getting trapped in the sponges. The plates have been redesigned with smaller holes so that sponges are no longer required. 

Copyright 2016 AquaMaxx Aquariums. All rights reserved.